ISO template for Autocad 14 — Terms and conditions of use

It is important that you read carefully the following terms of use. Your use, distribution, or installation of this copy of the ISO template for Autocad 14 indicates your acceptance of these terms. If you do not agree to any of the terms of use, then do not download, install, distribute or use this copy of the ISO template for Autocad 14.

NOTE — AutoCAD is registered trademark of Autodesk Inc. Windows is registered trademark of Microsoft Corporation.

Copyright statement
The ISO template for Autocad 14 may be used free of charge for the preparation of drawings intended for use in ISO and ISO/IEC International Standards, Technical Reports, International Standardized Profiles, Technical Specifications, Publicly Available Specifications and Guides or Amendments and Technical Corrigenda to these documents - no copyright applies for this purpose. Use for any purpose other than identified above is forbidden unless permission has been received in writing from ISO. Requests should be sent to

ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail: copyright@iso.org

Disclaimer
Although the ISO template AutoCAD 14 and the associated files have undergone testing by several experts, there is no guarantee that all their elements are error-free. They are supplied "as-is" without warranty of any kind, either expressed or implied. No liability is assumed by ISO for incidental or consequential damage resulting from their use.

These files were developed and tested using a number of national versions of AutoCad running under a number of operating systems. However, there is no guarantee that they will function on all platforms and all types of software, in all language versions. Should these files not function on your system, ISO is under no obligation to provide a solution.

ISO makes no claim as to the absence of computer viruses in the delivered files or their support. As a result ISO recommends that all files and their support be checked by the end user for viruses.

Installation of the ISO template for Autocad 14
IMPORTANT — If you work on a network, do not perform the installation yourself; ask your network administrator.

The ISO template for Autocad 14 is supplied as a compressed archive file (ZIP file) containing the following files:

ACAD.MNU AutoCAD menu
ACAD.PSF PostScript patterns
ACAD_MOD.MNU Template menu
ACADISO.LIN Line patterns
ACADISO.PAT Hatch patterns
GABARISO.DWT ISO AutoCAD template
GREEKS.SHX ISO 3098-2 font
ISOCP.SHX ISO 3098-1 font
README.TXT Terms of use, English
LISEZMOI.TXT Terms of use, French

To install the ISO template for Autocad 14, download the archive to a folder of your choice on the hard disk of your computer. Extract the files from the archive to the places indicated below.

IMPORTANT — Some of the above-mentioned files will replace existing files of the original setup. If deemed necessary, perform a backup of the original files before performing the installation of the ISO template.

The file GABARISO.DWT shall be saved in the directory AUTOCAD R14\TEMPLATE.

The files GREEKS.SHX and ISOCP.SHX shall be saved in the directory where SHX fonts are located (generally AUTOCAD R14\FONTS) – to determine the directory where SHX fonts are located, select the Tools menu, chose Preferences to display the Preferences dialog box, select the Files tab and expand the Support File Search Path branch by clicking on the plus sign (+) directly to the left of the label.

The other files (named ACAD*.*) shall be saved in the directory AUTOCAD R14\SUPPORT.

Remove the files ACAD.MNC, ACAD.MNR et ACAD.MNS from the directory AUTOCAD R14\SUPPORT.

Use of the ISO template for Autocad 14
The template must be invoked using the New command in the File menu of AutoCAD and selecting the file GABARISO.DWT.

Submission of technical queries
Please include the following information when submitting a technical query.

1. Version and language of AutoCAD and make, version and language of operating system [e.g. AutoCAD 2000i (English) on Windows NT4.0 (English)] used.
2. Version of the ISO AutoCAD template.
3. Working context of the problem.
4. Precise error message, if any (normally in standard Message box), or description of the incorrect behaviour.
5. Critical level of the problem:
   • level 1 - the template is unusable in its current state
     
   • level 2 - the template is usable but the error is persistent and greatly affects the template's usability
     
   • level 3 - the error appears only under certain conditions and is not critical for use of the template
     
   • level 4 - suggestion that would facilitate use of the template
     

ISO/CS contact for technical queries
Technical queries and comments may be sent to the following e-mail address: template@iso.org